> My questions are:
> 1. Do the above readings require replacement of the rotors?
IMO, .012" is too much, even if you don't feel it in the pedal. Of course,
it might be the hubs rather than the rotors ...
> 2. Could the runout be caused by some irregularity where
> the rotors are mounted to the hub?
Absolutely; especially if you don't see a corresponding variation in
thickness. After you check the mounting points, you can try turning the
rotor 180 relative to the hub and see if that improves things.
Randall
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|