Thanks to all who replied to my inquiry about solid steering mounts.
The consensus of experience is that the solid mounts cause very little or
no increase in the transfer of road vibration and very noticeably improved
steering response. The Goodparts solid mount was recommended over any other
available and John Mitchell recommended that I use an Allen head socket, not
an Allen wrench, to get the torque required to properly tighten down the
mounts.
Once again thanks to Al, John, Greg Aaron, Paul, Bill, Bob and Darrell.
Bob Rochlin
'72 TR6
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|