Paul,
If its not needed for structural support and is only cosmetic, why
not fill the hole with JB Weld or a product like that? Might be the
easiest to do.
Doug
At 10:53 PM 2/8/2007, you wrote:
>List,
>I am trying to become a welder and wonder if you can help me?
>
>I welded a cover plate over the open end of my TR3's inner sill. (I left a
>recessed opening for ventilation in order that condensation will escape). I
>used 18-20 ga. stainless steel. I got a couple of places too hot (evidenced
>by gray-black acne-like spots at those locations only.) I must be holding the
>nozzle too long in one spot because 1/8" hole 'opened up' in the middle.
>After waiting several minutes I went to weld it closed, but that caused it to
>gap open 1/4". How will I be able to close this gapping hole?
>
>Thanks,
>Paul Dorsey
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|