List,
I am trying to become a welder and wonder if you can help me?
I welded a cover plate over the open end of my TR3's inner sill. (I left a
recessed opening for ventilation in order that condensation will escape). I
used 18-20 ga. stainless steel. I got a couple of places too hot (evidenced
by gray-black acne-like spots at those locations only.) I must be holding the
nozzle too long in one spot because 1/8" hole 'opened up' in the middle.
After waiting several minutes I went to weld it closed, but that caused it to
gap open 1/4". How will I be able to close this gapping hole?
Thanks,
Paul Dorsey
60 TR3
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|