Hi Chris
I do not remember where, but I do recall something about red springs for
150BHP units, you could look here, http://www.kvaleberg.com/t_pi.html I
have checked briefly but do not have the time to read it all, I have also
scanned the Lucas Red book and the Leyland Green PI service book for info
and cannot see it, Both of these books are almost essential additions to
your armoury if you are going to play with PI cars! Also you could have a
look here, or give Malcolm a ring, He is very helpful.
Hope this helps,
Graham.
----- Original Message -----
From: "Chris Buckley" <chris.buckley51@yahoo.co.uk>
To: <triumphs@autox.team.net>
Sent: Thursday, January 25, 2007 5:17 AM
Subject: [TR] PI Metering units
> Dear Listers,
> Thanks for your input. One more question: How do you tell the difference
> between 150 and 125 bhp metering units by looking at them? The reason for
> the question is I am being offered a 150 unit but I would like to be sure
> that is what it is. The seller says that it has red springs indicating it
> to be 150bhp.
> Thanks in advance.
> Chris Buckley
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|