>From my hobby of knife collecting I would think that c58 is a rather soft
standard for lifters. C58 is the minimum hardness for a good knife edge.
It makes them easy to sharpen. C60 give you a longer lasting edge but is
somewhat more difficult to sharpen.
Best regards,
Tom
>Mine, courtesy of Integral Cams. As I recall, Steve's minimum Rockwell for
>TR lifters is c58. I had several new sets tested from various suppliers.
>Each new set had at least one "soft" lifter. I ended up having Steve
>resurface an original set of TR lifters, having first tested them of
>course.
_________________________________________________________________
Type your favorite song. Get a customized station. Try MSN Radio powered
by Pandora. http://radio.msn.com/?icid=T002MSN03A07001
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|