> OK, here's what we got. Switch lever up. (off) Start car, shift to 4th gear.
> RPM's = 2000 (just +), speed is 40 mph. Holding the gas pedal constant and
> engaging switch lever (down), rpm's stay the same and the speed goes to 50
> mph. Switch lever back to up position speed drops back to 40 mph. Sounds
> like a wiring issue. Reversed but where?
Not reversed anywhere ... that's normal operation !
As I said before, British switches operate the opposite of what Americans expect
: up is off.
If you want to change it (to be wrong, as a DPO did on TS39781LO), then you'll
need to disassemble the switch and either move one of the wires to the opposite
contact (inside the switch body), or just reassemble it upside down.
Randall
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|