I replaced the ball joint yesterday. I used the jaw type tool. Had to
get it from Napa, wasn't available from Auto zone or Advanced. Paid about
$5 extra for the convience of get it now. 21.00.
Popped right out no problem.
Auto Zone did have the pickle fork type tool for $10.00 or free rental with
15.00 deposit.
The replacement (Tiawan), ball joint threaded stem was about a 1/4 shorter
than the original, so the nut is flush with the end of it.
Cheers,
Al Salvatore
76 TR6
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|