> > Can anybody confirm the position of connecters C1, C2, W1 & W2 relative
> > to the relay when it's in place against the firewall? I can't read mine.
>
> Sorry, I don't have one handy to look at. But it's easy enough to figure
> out with an ohmmeter ... W1 and W2 will have a relatively low resistance
> between them (something like 100 ohms) while C1 and C2 will show no
> continuity at all. And you can safely ignore the numbers, all that matters
> is which two are the relay contacts (C1 and C2) and which two are the relay
> coil (W1 and W2).
Thanks Randall, I also found this diagram that looks right, I'm guessing the
wiring for a spit would be the same.
http://www.triumphspitfire.com/images/wiring/overdrivewiring.pdf
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|