Thanks Al,
I bought mine from The Roadster Factory and they came sans lubrication. I
just used some multipurpose grease on them. I will use anti-sieze lubricant
on the bolts though. Thanks for the suggestion.
Dave Connitt
-----Original Message-----
From: Alan Salvatore [mailto:6parts@charter.net]
Sent: Tuesday, July 04, 2006 4:08 PM
To: Dave Connitt; Triumphs
Subject: Re: [TR] TR4A Trailing Arm bushing Assembly Question
Make sure you use an antiseize lubricant on the bolt that goes through it.
Mine had some kind of prelube on them.
Al
----- Original Message -----
From: "Dave Connitt" <dconnitt@fuse.net>
To: "Triumphs" <triumphs@autox.team.net>
Sent: Tuesday, July 04, 2006 2:56 PM
Subject: [TR] TR4A Trailing Arm bushing Assembly Question
> Happy Fourth Everybody!
>
> I am getting ready to install my new urethane bushes in my TR4A trailing
> arms and I am looking for opinions as to whether I should lubricate them
> prior to installation. They appear that they could be installed either
> way.
> If anybody has lubed theirs, what did you use?
> Thanks in advance,
> Dave Connitt
> '67 TR4A
> http://home.fuse.net/davestr4a
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|