[TR] TR3A Vacuum Gauge

triumphs

[TR] TR3A Vacuum Gauge

To:	"Triumph List" <triumphs@autox.team.net>
Subject:	[TR] TR3A Vacuum Gauge
From:	"Eureka Saws Co, Inc." <ambritts@ptdprolog.net>
Date:	Tue, 4 Jul 2006 16:08:50 -0400

Hello all,
Will be installing a vacuum gauge on my 59 - TR3A. The only place I can think
to tap into is the vacuum advance line to the front carb. Any thoughts?
Alex Manzo
59 TR3A (getting real close to ignition)
72 TR6 (severely neglected lately)


===  This list supported in part by The Vintage Triumph Register
===     http://www.vtr.org

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[TR] TR3A Vacuum Gauge, Eureka Saws Co, Inc. <= RE: [TR] TR3A Vacuum Gauge, Randall

Previous by Date:	Re: [TR] TR4A Trailing Arm bushing Assembly Question, Alan Salvatore
Next by Date:	RE: [TR] TR4A Trailing Arm bushing Assembly Question, Dave Connitt
Previous by Thread:	[TR] TR4A Trailing Arm bushing Assembly Question, Dave Connitt
Next by Thread:	RE: [TR] TR3A Vacuum Gauge, Randall
Indexes:	[Date] [Thread] [Top] [All Lists]