> Just to be absolutely sure, I've checked list archives (search
> function isn't
> working right now), my manuals (they don't show it), and the Moss catalog,
> which does seem to indicate, that the banjo fitting for the oil
> pressure gauge
> goes to the filter head stud, not one of the bolts.
That's right, Terry, it's definitely the stud. There is a special nut used
here with a seal over the top, so oil can't leak past the threads.
Note that the copper washers are different sizes, too.
Randall
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|