Hi Terry,
The banjo bolt attaches to the lower oil filter housing bolt. Looking at it
from the side of the engine with the oil filter pointing toward the rear, it
is the bolt bottom left. Remember that there are two copper washers. One
thin and one thick. The thin one goes on the side of the banjo bolt facing
the engine. The thick one on the outside next to the acorn nut.
Alex
----- Original Message -----
From: "Terry Smith" <terryrs@adelphia.net>
To: <triumphs@autox.team.net>
Sent: Thursday, June 29, 2006 07:39 PM
Subject: [TR] Oil Pressure Banjo
> Hello, everyone.
>
> Just to be absolutely sure, I've checked list archives (search function
isn't
> working right now), my manuals (they don't show it), and the Moss catalog,
> which does seem to indicate, that the banjo fitting for the oil pressure
gauge
> goes to the filter head stud, not one of the bolts.
>
> This is on the upper left of the filter head.
>
> Do I have this right, before I start my engine for the first time this
> weekend?
>
> Thanks yet again, everyone,
> Terry Smith, '59 TR3A
> New Hampshire
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|