I don't suppose it would be possible to "thread" the bar through the
tow loops ... ??
>With the tow loops on the front of the stock TR4A radiator shield, I
>wonder where the bar would fit on a 4A. When you position the bar
>perfectly horizontal, it wants to sit where the loops are! So,
>either the loops have to be cut off, or the bar is in FRONT of the
>loops, or it is UNDER them in some manner, and thereby reducing road
>clearance.
>
>Some have said to replace the radiator shield with the TR6 unit, and
>then the TR6 bar fits properly. This might be the way to go. I
>really like the Goodparts sway bar, and its linkages. As you saw,
>one lister said that Richard could make a custom size bar without
>much trouble. That still leaves the problem of the tow loops being
>in the way. Do I hear a cut-off tool?
>
--
Bill Pugh
1957 TR3 TS16765L
aka
Casper
1970 TR6 CC59179L
aka
Rosey
Wallace, CA
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|