RE: [TR] TR4A Rear Oil Seal Tool Alternative

["Randall" <tr3driver@comcast.net>]

> Would it be possible to use the actual crankshaft itself?  Seems to me
> that the actual crankshaft to be used with the rear oil seal
> would be a far more accurate measure than some tool.

Can be used, in a pinch.  But, I believe the correct tool is supposed to provide
for a small, but not zero clearance.  Also there is some clearance built into
the bearings, and the crank will probably be at the bottom without the engine
running.

Randall


===  This list supported in part by The Vintage Triumph Register
===     http://www.vtr.org