> So...I've pulled the right rear brake plate which was completely fouled by
> gear oil leaking past the axle seal. New brake shoes are on the way. My
> question is this: What's the best way to clean up the hub assembly which
> now has
> been soaked in gear oil along with the grease that was in there?
> Bill Stagg
> 1960 TR3A
Bill,
A non-flammable solvent. Autozone or Pep Boys, any of those sells tall
spray cans of brakecleaner for about $5.00. Wipe what you can off with a rag
or paper towels, then sprayclean.
Terry Smith, '59 TR3A
New Hampshire
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|