Hoping not to start another firestorm, but I have a very basic question.
My TR3 Service manual says "Turn the engine over by hand until the
valves of any cylinder are on the "point of rock". Is this the same
as Top Dead Center? ... I am under the impression that at TDC both
valves are closed, and that is what is desired for adjusting the
valves.
I await the input from the collective wisdom ...
--
Bill Pugh
1957 TR3 TS16765L
aka
Casper
1970 TR6 CC59179L
aka
Rosey
Wallace, CA
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|