> From Randall --
>Manifold gaskets, thermostat gaskets, and unless you have one of Justin's
>silicone ones, a rocker cover gasket. You might get away with reusing the old
>ones, if they come off cleanly, but I'd certainly have new ones on
>hand. If the
>engine overheated at all, you might want to have a new thermostat on
>hand, too.
Which reminds me -- I've witnessed the failure of two brand new
thermostats in newly rebuilt engines recently. On of the engines was
destroyed. Everybody using a new thermostat should drop it in a pan
of boiling water and see when it opens.
-- just another "new part" that has to be checked 100%.
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|