When restoring my car, I took apart everything. When I went to the book to see
how to adjust the oil pressure after taking it apart and having it plated, it
said, NEVER take it apart. I rigged a hose and clamp onto my compressor, and
adjusted the air pressure up and down with the regulator until at 60 psi, I
could hear the ball lift and make a vibration sound. My car now has just
slightly above 60 psi warm, cold, & idle and just a little above that at speed.
Just what I did, Kent Shrack TS78563 "o"
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|