Can't remember but I used the large washers too!
Jim
-----Original Message-----
From: owner-triumphs@autox.team.net
[mailto:owner-triumphs@autox.team.net]On Behalf Of
KINDERLEHRER@comcast.net
Sent: Wednesday, July 13, 2005 9:52 AM
To: Jim Bauder; Terry Smith; triumphs@autox.team.net
Subject: RE: Seat Recovering
I also used pop-rivets, I also put small washers on the side where it went
through the wood so the rivet would spread against the washer and have less
of a chance of pulling back through the wood. Where the rivets would be
covered by the upholstry material I pounded the end of the rivet down flat
agaist the washer and filed down any sharp edges.
Maybe you told me to do that, Jim.
Bob
|