Mig works great - that's what I did :-)
> While working in the interior I removed both seats. I so doing I
> noted that several of the eight machine screws that attached the seat
> pan to the seat rails were either missing or had been replaced with
> much smaller machine screws. So I drilled out the broken & missed
> sized screws and found a set of machine screws left over from my MGA
> (that I sold 24 years ago)that fit perfectly. I new need a way to
> hold these new screws in place. I have tried contact cement, a
> series of different types of glues, and even some epoxy putty, none
> of which worked. I even tried to braze one in place...
>
> Any ideas short of finding someone with a Mig welder to tack them in
> place???
>
> John
> John A. Wise, Ph.D., CPE
>
> 5483 W Potter Dr
> Glendale, AZ 85308
>
> (+1)(623)376-9632
> Wise@erau.edu
>
> 1960 TR3A TS80422L
|