Well since the engine block is the same I suppose that you could. You
would need a back plate, bellhousing and clutch ( with master and slave
cylinders or something rigged) from a GT, then you would probably have to
make up a rear transmission mount, and fabricate a new drive shaft to mate
with the smaller u-joint the GT uses and possibly some tunnel mods for the
shifter- but WHY? The GT6 trans is barely adequate for the GT6, You would
tear one apart fairly quickly behind a TR6 motor (2500cc) and the
additional weight of a TR6, plus the gear ratios would most likely be
untsuitable for the slightly heaver TR6
**********************
>Can you swap the trans and differential from a 71 GT6 to a 72 TR6? If so
what modifications if any are required?
>
Barry Schwartz (San Diego)
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.296 / Virus Database: 265.6.8 - Release Date: 1/3/2005
|