Morning all,
Randall the probe is located inside the top of the Radiator. The kit
specifies placing it inside the top Radiator hose extended into the rad.
Just to help me understand - why is it better to put the probe in the return
from the rad to the water pump?
Thanks, as always, for the help!
Wayne
----- Original Message -----
From: "Randall Young" <Ryoung@navcomtech.com>
To: <triumphs@autox.team.net>
Sent: Tuesday, April 20, 2004 11:56 PM
Subject: RE: * Rack & Pinion Conversion / Thermostat Temp *
> > Here's my question, though. Now I have removed the mechanical
> > fan and have
> > gone to a thermostatically controlled electric fan what
> > temperature should I
> > set it too?
>
> Where is your probe mounted ? If it's in the return from the radiator to
> the water pump inlet (which IMO is where it belongs), then I would set it
to
> the nominal opening temperature of your thermostat (ie 185F). If it's
> closer to the outlet from the head to the radiator, I'd set it about 10F
> higher.
>
> Randall
|