Hello Don, he (Apple) mentioned that the sleeve would be subject to getting
out of round in case you would ever have a need to place the BMC in a vice
and place pressure on the cylinder thus causing the inside sleeve to become
out of round and rendering it useless.
Don't shoot the messenger on this.
Bernie
CF20268UO
----- Original Message -----
From: "Don Malling" <dmallin@attglobal.net>
To: "bernd" <bernd.vabeach@erols.com>; "6-Pack" <6pack@autox.team.net>;
<triumphs@autox.team.net>
Sent: Thursday, March 11, 2004 4:55 AM
Subject: Re: TR6 oversized seals-answer
> Maybe try http://www.brakecylinder.com/prices1.htm
>
> TR250/TR6 dual bore MC resleeve in brass is $110.00. No more pits. Did
> he say why resleeving was not a good way to go?
>
> Did a nice job on mine.
>
> Don Malling
>
>
>
> bernd wrote:
> > Jay:
> >
> > I spoke to a Apple Hydraulics Rep. yesterday by the name of "Lazar"
this is
> > what he told me: they would reseelve the MBC but he felt that is not a
good
> > way to go and more expensive, total of 225.00, his recommendation is for
> > them to overbore the MBC at a cost of 125.00 and yes they do sell the
> > oversize repair kit. I asked about the warranty for the work, Lazar
told me
> > there was a one year warranty.
> > I'm just shopping around and getting a spare ready.
> > Bernie
> > CF20268UO
> >
> > ----- Original Message -----
> > From: "Jay Welch" <jay_welch@juno.com>
> > To: <Triumphs@autox.team.net>
> > Sent: Wednesday, March 10, 2004 8:01 AM
> > Subject: Re: TR6 oversized seals-answer
> >
> >
> >
> >>Thanks to both of you. I always assumed that they bored the original MC
> >
> > bore to fit a sleeve thus retaining the original bore size and
accomodating
> > the standard rebuild kits.
> >
> >>Jay Welch
> >>Abington, MA
> >>TR6s
> >>Member Cape Cod British Car Club CCBCC
> >
> > http://www.capecodbritishcarclub.org/
> >
> >>---
> >>
> >>Thanks to Gerald M Van Vlack, I found that I was wrong about how
> >>Apple Hydraulics remanufactures brake MCs for TR6s. They use
> >>oversized pistons to fit the rebored cylinder and they do sell the
> >>oversized seals. Thanks to all who offered help and especially to
> >>Gerald.
> >>
> >>Tim
|