It sounds like going with the wider pulley on the alternator is cheaper and
easier. If anyone knows of where I can get a smaller pulley to put on the
alternator, please let me know.
thanks,
Joe
> That's what I did, by having a machine shop bore out the original pulley to
> fit the larger alternator shaft. There are also commercially available
> pulleys that will work better (smaller diameter, which allows you to use the
> original belt and also turns the alternator faster for better charging at
> idle), but I don't know of a source offhand.
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|