> REPLACE THEM - no short cuts here, if they are pitted they are gone - and
> you can't just smooth the lifters bottoms. They are ground with a very
> slight crown in them which you wont be able to reproduce by simply lapping
> them on a flat surface -
Any decent cam shop should be able to grind the radius back on the bottom,
but for most lifters they will then need to be hardened.
Randall
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|