triumphs
[Top] [All Lists]

RE: Fan Belt Replacement

To: "'Dave Massey'" <105671.471@compuserve.com>, "'Ian Clough'" <mc_ian@yahoo.com>
Subject: RE: Fan Belt Replacement
From: "Hugh Fader" <hfader@usa.net>
Date: Mon, 7 Jul 2003 10:25:28 -0400
Cc: "'triumph list'" <triumphs@autox.team.net>
You could also slide the engine back in it's mounts as far as it will go. I
did this when I re-installed it after rebuilding. No problems now.

- Hugh
>
> Message text written by Ian Clough
> >I'm installing a new fan belt on my '75 TR6.  I was
> under the impression that I only needed to move the
> cross-member-tubing-thingy away from the pully to slip
> off the old belt, but I found that the steering rack
> is also in the way!! Am I missing something??  Does
> the steering rack also have to be moved??  My Haynes
> manual mentions NOTHING about the rack!  Damn!
> <
>
> That's been my experience.  Other's have said that they have
> had no problem
> but on my car the clearence between the pulley and the rack
> is much less
> than the width of the belt.
>
> Dave

///  triumphs@autox.team.net mailing list
///  or try  http://www.team.net/cgi-bin/majorcool
///  Archives at http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>