Re: Installed Defective Cam. Need Advice On New One

["Bob Fabie" <RFabie@erols.com>]

Thanks for the reply, David.
For everyone's benefit, I should state the obvious and assure all that the
cam was properly broken in, cam lube was used and the valves were adjusted
to cam specs. As I noted in my original posting, I'm not assigning blame
until I see the cam and the lifters. One or the other caused the problem, so
one or the other was defective. I know/have heard from several owners who
have installed the Piper cam and have not had problems.
I'll keep you and the list posted.

Bob Fabie

///  triumphs@autox.team.net mailing list
///  or try  http://www.team.net/cgi-bin/majorcool
///  Archives at http://www.team.net/archive