Robert...
On a 4-hole wheel, measure center to center of opposing wheel studs. Also
measure center hole of wheel...diameter. A steel ruler should suffice for
this.
You probably should also measure backset...this is the distance (measured on
the 'back side' of the wheel...from rim edge down to flat part of wheel
center that sits against the brake drum. Just set a straight edge on wheel
rim and measure down...
I think this should cover it...
Larry M
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|