Speedi-sleeve for differential pinion seal for tr6,
Moss, #520-500
Al Salvatore
----- Original Message -----
From: "Rick Taylor" <rgt3000@fuse.net>
To: "Alan" <asalvato@tampabay.rr.com>
Sent: Wednesday, February 12, 2003 7:11 PM
Subject: Re: Speedi Sleeve
> Thanks for the reply. Is this in the catalog? I can't find it online and
> do not have a TR6 catalog.
>
> Do you have the part number handy?
>
> Thanks
>
> > ----- Original Message -----
> > From: <rgt3000@fuse.net>
> > To: <triumphs@autox.team.net>
> > Sent: Wednesday, February 12, 2003 1:32 PM
> > Subject: Speedi Sleeve
> >
> >
> > > I need the help of the list.
> > >
> > > My TR4a has developed a serious leak from the pinion seal. I want to
> > replace the seal and use a speedi sleeve to cover the groove in the
pinion
> > flange. Has anyone done this and if so, what was the part number on the
> > sleeve, and wher did you buy the sleeve.
> > >
> > > Thanks in advance
> > >
> > > Rick
> > > 66TR4A
> > > CT57505
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|