> I just found
>someone parting out a TR250. Is this the same size as a TR6 sway bar?
>
>David Oliner
David,
The 250 didn't come from the factory with a sway bar. I fitted one to mine
from a '71 TR6. The radiator skid pan on my car was not drilled, so I used
the TR6 pan (same size and shape but with holes). I also needed the longer
bolts and spacers for bolting to the lower A arm. I found that bolting the bar
to the skid pan before fitting them to the car was the best way (better than
moving the radiator!!)
Good luck!
Brian
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Brian Borgstede !
Distance Learning Engineer !
University of Missouri - St. Louis ! '68 Triumph TR-250
Phone: (314)516-6433 ! (or two or more)
Fax: (314)516-6019 !
Email: borgstede@umsl.edu !
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|