Hi Scott
The bracket goes to one of the bolts that hold the coil to the block.
Mike Thompson
On Sunday, October 6, 2002, at 11:04 PM, suhring wrote:
> As I continue to install all parts back onto the engine of my '59
> TR3 restoration, I have a question regarding the fitting of the
> heater return water pipe. Is the bracket that secures the pipe
> to the block supposed to be welded to the pipe or is the bracket
> supposed to be movable to adjust its positioning? The reason
> I ask is mine is welded and if the pipe is screwed into the
> water pump and the right angle bend at the other end is facing
> away from the block so that the heater hose will fit on with the
> straight end and the right angle bend in the hose faces the
> fire wall to fit on the pipe connector, the bracket faces away from
> the block rather than vertically down along the block. If it
> does face away from the block, what secures it?
>
> Hope I explained this clearly enough...
>
> Scott Suhring
> Elizabethtown, PA
> '70 TR6
> '59 TR3
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|