> Second, not sure on this one but I seem to recall the red plastic jets are
> 0.090 inch diameter hole and the black ones are 0.100 inch diameter hole.
According to my SU catalog, red/black indicates whether the jet is for
horizontal or semi-downdraft applications. No indication as to what the
difference is otherwise. .090" jets have no groove on the vertical brass
part, while .100" jets have a single groove.
Randall
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|