Message text written by Hugh Fader
>Just went back out and adjusted the toe-in to 1/16" and took a ride. I
found
that each turn of a tie rod changes toe-in by 1/16". Don't know if others
have observed this, but it seems a good thing to remember.
<
Well, let's see, what is the thread on the tie rods? 5/8-18? And since
the tie rods are a little closer to the pivot than the point at which you
are measuring the toe in, that makes sense. (of course a closer inspection
will probably reveal that it is close but not exact - but for minor
adjustments, close enough)
Cheers
Dave
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|