Kurtis wrote :
> > The cavity should definitely NOT be filled. Yes, it's entirely possible
> to
> > over-grease the hub, the typical result is grease being forced past the
> > inner seal and thrown onto the brake disc. Only the bearings need to be
> > greased, it actually takes only a small amount.
> >
> > Randall
>
> Randall...
>
> This is what I've always been told as well... In fact, doesn't too much
> grease actually cause excessive heat build-up in the bearing?
Seems unlikely to me, but I could certainly be wrong.
Randall
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|