> The cavity should definitely NOT be filled. Yes, it's entirely possible
to
> over-grease the hub, the typical result is grease being forced past the
> inner seal and thrown onto the brake disc. Only the bearings need to be
> greased, it actually takes only a small amount.
>
> Randall
Randall...
This is what I've always been told as well... In fact, doesn't too much
grease actually cause excessive heat build-up in the bearing?
Kurtis J.
1963 TR4
Russellville, AR
www.geocities.com/tr4_1963
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|