In a message dated 8/14/02 4:45:05 PM Eastern Daylight Time,
ryoung@NAVCOMTECH.COM writes:
> > I'm down to the last bolt holding the radiator in at the
> > bottom. It takes a
> > 9/16 wrench. My socket can't get in there and the standard open
> > end/ closed
> > end wrench gets no leverage to loosen it.
>
> Ray, Sears (and probably others) sells a 1/4" drive 9/16" socket that will
> get into that space with a 1/4" extension on it (at least on my 59 TR3A).
>
> > Will the 'bent' type
> > wrench do the
> > trick?
>
> I've no idea, I don't even own one.
>
> Randall
>
Randall:
Got the short handled 1/4 ratchet. It'll fit. Thought I had the 1/4 drive
9/16 socket or adaptor for 3/8 socket but I don't. Too bad.
But... I bought the 'bent' wrench with the zig-zag and it woiked!
Radiator's out finally,
(Dave's bolt head extenders or socket caps sound cool too.)
Thanks
Ray
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|