Thanks Martin. I still don't really understand. Can you see the needle head
somehow?
What I did was turned the needle adjustment fully clockwise (rich), then
backed off one turn. Started up fine. Then had to tweak it a bit.
- Hugh
> -----Original Message-----
> From: M. Secrest [mailto:msecrest@erols.com]
> Sent: Wednesday, June 05, 2002 8:02 PM
> To: Hugh Fader
> Cc: 'triumphs'
> Subject: Re: Way too much flow thru front carb
>
>
> Hugh:
>
> If somehow you don't yet have your answer ... this means that
> the bottom of the
> needle's head should be flush with the bottom of the piston.
> It's just a
> convenient way to set the mixture before you fine tune it.
>
> --
> Martin Secrest
> 72 TR6
> 73 GT6
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|