Jim :
The pinch bolts on the throttle linkage take a 1/16" Whitworth, the nuts on
the dashpot plungers take a 7/16" Whitworth. If you get a set that covers
those two extremes, you should be set.
Randall
> I have found a supplier of Whitworth hand wrenches that is both in the
> country in which I live, and (now, finally) has stock.
> It's been so long since I looked into this that I forget what
> sizes I will
> need. Can someone advise? I think the SUs and maybe the generator and
> starter are about the only things on the car that use them, but I can't
> estimate the sizes by looking at the nuts. (Also have Zenith carbs on the
> tractors that I suspect will be Whitworth.)
> Thanks,
> Jim
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|