Message text written by Scott Tilton
>A related question: how interchangeable are the parts?
Can I take a air valve (piston) top cover from different carbs and still
expect
them to work together? (there are probably some issues about centering the
jet
or something of the sort)
<
The Strombergs are less sensitive to this but as you say you may have to
recenter the jet. The piston rides up and down in the cover on the dashpot
bores and you may have to keep the piston and covers together as pairs.
But it is possible that the manufacturing tolerances are good enough that
you can swap them around.
The diaghrams are fully interchangable.
Also check that the springs are both there.
Good luck
Dave
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|