Hi Brian
I would agree with Randall on this, just be aware that the last thing you
want in the ram(s) is grit / dirt, so make a good job with the tape. This is
all we did even on site when changing / repairing hoses on JCB excavators.
Graham.
|
| If it were me, I'd just drain and discard the hydraulic oil and tape over
| the exposed ends with masking tape during transport, then refill with
fresh
| oil after reinstallation. But, Aircraft Spruce would be one source for
| plugs.
| http://www.aircraftspruce.com
| http://www.aircraftspruce.com/catalog/hapages/caplugpdseries.php
| http://www.aircraftspruce.com/catalog/hapages/caplugtseries.php
|
| Randall
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.282 / Virus Database: 150 - Release Date: 25/09/01
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|