There should be a steel line that runs from the flex line upwards along
the surface of the bulkhead (turning to follow the surface), then turns
horizontal for a bit and runs through a rubber grommet, then to the oil
pressure gauge on the dash. Don't recall for sure, but I think there's
a single clip with a sheet metal screw, about 1/2 way up the battery
box. ISTR there's a photo in the owner's manual that shows the pipe and
clip (which are in the same location for either RHD or LHD).
Randall
David Templeton wrote:
>
> I have a line from the banjo fitting on the oil filter, it runs up by the
> fuel pump and a flex hose goes into it, where does the other end of the flex
> hose go?
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
|