try and find an industrial fastener shop. You might have to ask at your
local NAPA or other shops. You will find the best hardware very inexpensive
their. That failing, NAPA carries a selection of good quality grade 8s.
They might or might not have nylocs. If they don't they sell something
comparable. I can't remember the exact name but they are a little pinched
in at the top. They work just as well.
Word of Wisdom. Nuts and Bolts sold in packages at local discount auto
stores (Advance, AutoZone, PepBoys) are not good quality and do not match up
to their stated strength.
If all else fails they can inexpensively be ordered over the internet, you
typically have to buy a hundred though (quite often still cheaper).
Patrick Bowen
-----Original Message-----
From: Martin A. Secrest [mailto:msecrest@erols.com]
Sent: Wednesday, November 29, 2000 4:40 PM
To: triumphs@autox.team.net
Subject: Re: GT6 Half-Shaft Bolts
Does anyone (in a big city area like D.C.) really sell grade 8 nylocs??
##
James V Laviana III wrote:
> Use the nyloc nut for these applications, they won't come loose and use
> the German torque (goodentight).
> ________________________________________________________________
> GET INTERNET ACCESS FROM JUNO!
> Juno offers FREE or PREMIUM Internet access for less!
> Join Juno today! For your FREE software, visit:
> http://dl.www.juno.com/get/tagj.
|