Brian Kemp wrote:
>
> I just happen to a brand new pair of rotors for my TR6 on my living room
>floor.
> One is 0.504 inches thick and the other is 0.506". Right about 1/2" if you
> measure with regular tools. I guess that is close enough for the new Italian
> made rotors from TRF. I can even read the minimum thickness on the side -
>11.4
> mm.
Important to note, briefly, that there _are_ still more than a few
metrically-challenged mechanics running brake lathes out there, so it
should be said that the 11.4 mm printed on these rotors indicates a
minimum thickness of 0.448".
Cheers, all.
--
Michael D. Porter
Roswell, NM
[mailto: mporter@zianet.com]
`70 GT6+ (being refurbished, slowly)
`71 GT6 Mk. III (organ donor)
`72 GT6 Mk. III (daily driver)
`64 TR4 (awaiting intensive care)
`80 TR7 (3.8 liter Buick-powered)
|