The usual way of sealing the rims of wires is to use a rubber band on
the inside, that covers the nipples. New rims used to come with
these. If you dont have one, then you can use an old innertube to make
one.
On Tue, 5 Sep 2000, Fred Thomas wrote:
>
> This was on the other list, may be some help or they can guide you on this,
> sorry I deleted Jow Flakes address, Joe I hope you also receive this. "FT"
> ----- Original Message -----
> From: <SFKTREMCO@aol.com>
> To: <looft@erinet.com>; <SFKTREMCO@aol.com>; <british-cars@autox.team.net>
>
> >
> >
> >
> Will never need adjustment. I also made them tubeless with sealant on
> each nipple inside the rim.
>
>
>
>
James A. Ruffner
|