--part1_9.a32ce33.26e560d0_boundary
Folks, been a while since I messed with this. Anyone able/want to help him
out? . His e-mail is: gpdupey@aol.com
Thanks.
Art Kelly
--part1_9.a32ce33.26e560d0_boundary
Content-Disposition: inline
Return-path: <Gpdupey@aol.com>
From: Gpdupey@aol.com
Full-name: Gpdupey
Date: Mon, 4 Sep 2000 16:12:35 EDT
Subject: Another silly question from Greg in Illinois
To: ArthurK101@aol.com
Arthur,
Thanks for your help in defining T.D.C. a month or so ago, but I am now
getting back to trying to get my rebuilt 1962 tr4 started. I put oil in and
cranked it. I got a small leak at the timing cover and also at he oil filter
which I have repaired but the big one is at the rear main seal. I put in a
new rear main when I rebuilt the engine (one of the $128.00 ones from Moss)
but oil is coming out from under the cover over the lower portion of the gear
box and also out of a small hole that is in the center, bottom of the gearbox
housing. I drained the oil and took off the pan but I am at an impasse and
need a little direction before I go tearing into and pulling out the main
seal. I know if I do I will have to drop the transmission (right?) and what
else.
Any ideas that you may have would be helpful. Unfortunately I rebuilt the
engine 2 years ago and don't remember a lot about what I did or didn't do but
I believe I followed the shop manual pretty close.
Thanks for any advise you can give. I will give you my phone number (I will
call you back on my nickel) if it would help to talk directly. 847-265-6683
Thanks,
Greg DuPey
--part1_9.a32ce33.26e560d0_boundary--
|