Dave, Mine is 1 3/8" from the bend in the fire wall to the bottom of the
plate and it is centered between the wall on the left and the edge of the
blanking plate cover, with about 1/8" on each side.
Cheers,
Rob Robertson
Seattle
----- Original Message -----
From: David Moag <moag@ix.netcom.com>
To: Triumphs Mailing List <triumphs@autox.team.net>
Sent: Thursday, July 20, 2000 12:58 PM
Subject: TR3 Commission Plate Position
>
> Hello Listers,
>
> I need to know the proper location of the rivet holes for the TR3A style
> commission plate. The dreaded DPO had cut three huge circular holes into
> that portion of the bulkhead and I had to have a patch panel welded in to
> make things look (mostly) OK ... but in the process lost track of where it
> should be mounted.
>
> So if someone can measure where the two holes are in from the top, bottom,
> left, right, etc... then I can end up looking reasonably correct.
>
> THANKS!
>
> Dave Moag
> 62 TR3B (just about on the road!!!)
> 77 Spitfire
> La Canada, CA
>
>
>
|