Hi Michael
This pin has a spring on the back and pushes in about a 1/16" then pull the
knob off, I used the end of a window winder coil spring straightened out to
push with but then I have a box with dozens in and it was the first thing
that came to hand.
Graham.
2500PI MKII
Sprinted Dolomite
2000 MKI
Toledo 1300
1300 front wheel drive
http://members.tripod.co.uk/TriumphIW/index.html
----- Original Message -----
From: <OHFASTONE@aol.com>
To: <triumphs@autox.team.net>
Sent: Monday, May 15, 2000 7:14 AM
Subject: Now I've got questions
>
> Listers,
> I was out back pulling the dash out of my 72 GT6, two thirds of it came
out
> with no problem. The left hand section is where the difficulty arose, I
> can't get it loose. Plus, on this same section is the washer/wiper
switch.
> In trying to remove the knob, I noticed that it is retained by a pin
pressed
> through the knob and into the shaft. Problem is, it does not appear to
screw
> in and there is no hole on the opposite side to press it out. Before I do
> what crossed my mind, Iwant to hear what you have to suggest.
>
> Michael
|