On Sun, 16 Apr 2000, Ken Gano wrote:
> While scrounging some parts off the spare Model ten today, I wanted to pull
> the side panels and ran into difficultly removing the wind up window and
> door latch handles. There appears to be a spring that needs to be
> compressed but beyond that, I'm lost. I presume there is some sort of clip
> holding the handles on, but could not see anything in particular.
> Suggestions appreciated.
Ken, as with almost any other "modern" Triumph with roll-up windows, the
handle is held on with a simple pin. Push on the "escutcheon" to compress
the spring, then look for small holes at 90 degrees around the end of the
handle. In one of those holes you'll see the pin; push it out and the
handle comes off!
--Andy
* * * * * * * * * * * * * * * * * * * * * * *
* Andrew Mace, President and *
* 10/Herald/Vitesse (Sports 6) Consultant *
* Vintage Triumph Register <www.vtr.org> *
* amace@unix2.nysed.gov *
* * * * * * * * * * * * * * * * * * * * * * *
|