Hi John
Lift the wiper arms up off the screen, then wind them round until the spring
comes out.
Graham.
----- Original Message -----
From: john Kossup <johnek@hotmail.com>
To: <Triumphs@autox.team.net>
Sent: Tuesday, April 11, 2000 10:36 PM
Subject: Wiper Cable
>
> Fellow Listers:
> I turn once more for assistance. My wipers on my 1975 TR6 stopped
working.
> I took the motor and drive out and in doing so only about six inches of
the
> cable which rides inside the tube came with it. I assume it is broken and
> this is why my wipers do not move. The problem is I am now left with the
> balance of the cable left inside the tube and no way to extract it. A
> magnet does not do the trick. I have tried approaching it through the
wiper
> housing on top of the cowl..no luck. My manual shows that the tube runs
the
> full width of the dash. Is it possible to extract this tube, cable and
all
> easily. I need your help and suggestions. Many thanks...again...
>
> J. Kossup
> 75 TR6 in Canada
>
|